Brick veneer, motarless, self-supported : Novabrik
Novabrik offers a unique mortarless brick veneer that screws directly into walls, providing durability and easy installation. Ideal for residential or commercial projects, self-ventilating and mechanically fastened for extra strength. Without mortar needs, it can be installed in all seasons, making it a versatile and cost-effective solution for replacing traditional siding like wood, vinyl or fiber-cement board.
Free Quote - Free Sample - Free Take-off
Provide us with your details and we'll get back to you as soon as possible.
Novabrik’s Available Colors & Texture
Novabrik’s mortarless brick siding comes in a variety of colors and texture throughout Canada. The color swatches presented here may not accurately represent actual brick colors. Check the brick samples at your local Novabrik dealer or contact the manufacturer.
- All
- Quebec / Ontario
Harvest Blend (Split)
Marble White (Split)
Smokey Mountain Blend (Split)
Arlington Blend (Split)
Colonial Red (Split)
Charcoal (Split)
Walnut (Split)
Desert Sand (Split)
Aspen Grey (Split)
Novabrik Components
Discover the many components that go into creating Novabrik’s self-ventilated, mortarless brick siding. Get the detailed specs of each individual component and learn how to install them along the way.
Novabrik
Novabrik is the main element of our system. The unique interlocking system creates a weather and water-resistant system. To install it, use #8 x 2½” screws. The starter strip is required to start the first row.
Download Specifications
Material: concrete 25 Mpa
Weight (approx): 5.3 lb
Dimensions: 8″x8″x2.5″ – exposed face 8″x4″
Coverage: 4.5 bricks per sqft
Selling format: 100 sqft pallet and 20 sqft pallet
Exterior Corner Block
An important element for waterproofing the exterior angles of the building. The corner strip is necessary for installation. Attach it with #8 x 2½” screws and construction glue.
Download Specifications (Split Face Bricks)
Material: concerte 25 Mpa
Weight (approx): 4.4 lb
Dimensions: 4″x4″x6″
overage: 2 blocks per ft
Selling format: unit
Download Specifications (Smooth Face Bricks)
Material: concrete 25 Mpa
Weight (approx): 5.9 lb
Dimensions: 4″x4″x8″
Coverage: 1.5 blocks per ft
Selling format: unit
Interior Corner Block
This block brings a perfect, waterproof finish the interior angles of the building. No accessory is needed for installation. Use #8 x 2½” screws and construction glue.
Download Specifications (Split Face Bricks)
Material: concrete 25 Mpa
Weight (approx): 6.7 lb
Dimensions: 4″x4″x6″ exposed face: 1 1/8″ x 6″
Coverage: 2 blocks per ft
Selling format: unit
Download Specifications (Smooth Face Bricks)
Material: concrete 25 Mpa
Weight (approx): 8.9 lb
Dimensions: 4″x4″x8″ exposed face: 1 1/8″ x 8″
Coverage: 1.5 blocks per ft
Selling format: unit
Window Sill
This piece inserts under windows to protect the wall from water infiltration. It can also be used to finish a half wall (flashing could be necessary). This piece is smooth on one side and split on the other.
Download Specifications
Material: concrete 25 Mpa
Weight (approx): 13.2 lb
Dimensions: 15¾” x 4¼” x 2½”
Coverage: 1 block every 2 ft
Selling format: unit
Wainscot Cap
Designed to finish the top of a half wall, this piece marks the transition to another material and protects the wall from above water infiltration (installation of flashing could be necessary). It’s installed with construction glue.
Download Specifications (Split Face Bricks)
Material: concrete 25 Mpa
Weight (approx): 7.9 lb
Dimensions: 8″x3½”x5″
Coverage: 1.5 blocks per ft
Selling format: unit
Download Specifications (Smooth Face Bricks)
Material: concrete 24 Mpa
Weight (approx): 6.7 lb
Dimensions: 8″x3½”x5″
Coverage: 1.5 blocks per ft
Selling format: unit
Bullnose
Designed with the same purpose as the wainscot cap, but with a round profile. It’s produced only in smooth texture and attached with construction glue.
Download Specifications
Material: concrete 25 Mpa
Weight (approx): 5.9 lb
Dimensions: 8″x5″x3½”
Coverage: 1.5 blocks per ft
Selling format: unit
Starter Strip SV
This accessory is used on all walls to start the first row of Novabrik. The self-ventilated system has channels every 6″, which allows the air to evacuate moisture behind the siding. It must be attached with #8 x 2½” screws.
Download Specifications
Material: recycled PVC
Weight (approx): 4.2 lb
Dimensions: 96″x2¼”x3½”
Coverage: 1 Starter strip each 8 ft
Selling format: unit
Corner Strip
This accessory is used to install exterior corner blocks. Use #8 x 2½” screws for installation.
Download Specifications
Material: galvanised steel
weight (approx): 2.2 lb
Dimensions: 48″3″x3″
Coverage: 1 Corner strip every 4 ft
Selling format: unit
Window Trim
This accessory is used to install exterior corner blocks. Use #8 x 2½” screws for installation.
Download Specifications
Material: recycled PVC
Weight (approx): 2.0 lb
Dimensions: 96″x2″x3″
Coverage: 1 Window Trim every 8 ft
Selling format: unit
Additional Notes & Tips
The screws length is suggested for a standard installation, length can vary depending on various factors like the presence of a rigid insulation or others, verify with the installation guide or contact the technical service.
In some cases installing a flashing could be necessary to avoid water infiltration or other weather elements.
Placing an insulation (wrap-house, rigid insulation, etc.) is recommended before proceeding to the Novabrik installation.
Novabrik Full Installation Guide
Not sure how to install Novabrik? This PDF booklet is the official Novabrik Installation Guide. Some of the components shown in this Guide may not be available in your area.
Frequently Asked Questions
What is Novabrik?
Novabrik is a patented mortarless brick siding system. The tongue and groove units are made of high strength concrete. They overlap and interlock to create a strong, water resistant brick veneer. Novabrik hangs on the wall. No brick ledge or steel angle is necessary for support at the base of the wall or above openings. Novabrik can be installed on wood, steel and concrete structures.
How does Novabrik work?
Novabrik is installed on the wall with corrosion-resistant screws. They hang on the wall and lock together as they are stacked.
How big are the bricks?
Novabrik measures 8″ high x 8″ long, the visible face measures 4″ high.
How many bricks do I need for my project?
4.5 bricks are needed to cover one square foot of wall area (48.5 bricks/m2).
How much do they weigh?
One brick weights 5.3 lb (2.4 kg)
What are the available colors?
Novabrik comes in a variety of colors. View them all on the Colors & Textures page.
What are the available textures?
Novabrik comes in two textures: SPLIT and SMOOTH. View them on the Colors & Textures page.
How much does Novabrik cost?
Novabrik costs about the same as good wood siding. You can also Get A Quote for your project. Our Novabrik professionals will advise you on what you need.
Will I ever need to paint?
The color is permanent and won’t fade or peel like paint.
Can Novabrik be used on concrete foundations?
Yes. Just install pressure treated furring strips with concrete screws into the concrete foundation. And install as normal.
Can I install Novabrik myself?
Yes. If you are comfortable working with a few basic tools – masonry saw, hammer drill, level and screw gun – you can install Novabrik. No special skills are required.
Where can I find someone to install it?
Your local Novabrik manufacturer or Dealer may be able to refer installers to you.
Where can I buy Novabrik?
Use our Find A Dealer tool. Novabrik may not be available in your area yet. The network of licensed manufacturers and distributors is expanding. In the mean time, you can contact Novabrik International Inc. and we can arrange shipping to your location.
How long will Novabrik last?
Like other concrete products, our high-strength Novabrik are made to last. Our products also come with a 50 year limited warranty for your peace-of-mind.
Does Novabrik come pre-drilled?
No. Only some of the bricks need holes. Use a hammer drill to make the job easy.
What type of screws do I need to use?
You should use corrosion-resistant screws, high quality coated deck screws will work fine. If you live in a coastal area (less than 5 miles (8 km) from the ocean) you have to use stainless steel screws.
Do I need to screw every brick?
On the first row you will use one screw per brick at each furring strip. After that, you will stack four more rows, and then install one screw at each furring strip. Novabrik are attached on only every fourth row at the furring strips. This fastening pattern can carry 7 times the weight of the brick veneer. No need to increase the number of screws.
What are furring strips?
We recommend that you use 1 in x 3 in wood strips if they are available, 1 in x 4 in will work just as well. There is no need to use pressure treated wood for the furring strips.
What are the purpose of furring strips?
Furring strips do two things. They creates an air space between Novabrik and the house wall to let the siding breathe and they provide a positive connection for the brick while allowing you to correct uneven walls.
Where do I place the furring strips?
The furring strips are attached to the wall framing with our corrosion-resistant screws. Be sure to locate and attach the furring strips to the existing wall framing. These screws need to penetrate wood studs at least 1-1/4 inch.