What is Novabrik?
Novabrik is a patented mortarless brick siding system. The tongue and groove units are made of high strength concrete. They overlap and interlock to create a strong, water resistant brick veneer. Novabrik hangs on the wall. No brick ledge or steel angle is necessary for support at the base of the wall or above openings. Novabrik can be installed on wood, steel and concrete structures.
How does Novabrik work?
Novabrik is installed on the wall with corrosion-resistant screws. They hang on the wall and lock together as they are stacked.
How big are the bricks?
Novabrik measures 8" high x 8" long, the visible face measures 4" high.
How many bricks do I need for my project?
4.5 bricks are needed to cover one square foot of wall area (48.5 bricks/mĀ²).
How much do they weigh?
One brick weights 5.3 lb (2.4 kg)
Click the "Where to Buy" section on the top of the page to find out the available size(s) in your area.
What are the available colors?
Novabrik comes in a variety of colors that you can see .
Otherwise, click the "Where to Buy" section on the top of the page to find out the available color samples in your area.
What are the available textures?
Novabrik comes in two textures: SPLIT and SMOOTH.
How much does Novabrik cost?
Please contact your local material dealer. Novabrik costs about the same as good wood siding.
Will I ever need to paint?
The color is permanent and won't fade or peel like paint.
How long will Novabrik last?
Like other concrete products, our high-strength Novabrik are made to last.
Where can I use Novabrik?
On the Find an installer page of this web site you will find a list of installers or simply contact your local manufacturer. Your local Novabrik dealer may also be able to refer installers to you.
Can Novabrik be used on concrete foundations?
Yes. Just install pressure treated furring strips with concrete screws into the concrete foundation. And install as normal.
Can I install Novabrik myself?
Yes. If you are comfortable working with a few basic tools - masonry saw, hammer drill, level and screw gun - you can install Novabrik. No special skills are required.
Where can I find someone to install it?
On the of this web site you will find a list of installers or simply contact your local manufacturer. Your local Novabrik dealer may also be able to refer installers to you.
Where can I buy Novabrik?
Please contact your local dealer, you can also find a on this web site. Novabrik may not be available in your area yet. The network of licensed manufacturers and distributors is expanding. In the mean time, you can contact Novabrik International Inc. and we can arrange shipping to your location.
Does Novabrik come pre-drilled?
No. Only some of the bricks need holes. Use a hammer drill to make the job easy.
What type of screws do I need to use?
You should use corrosion-resistant screws, high quality coated deck screws will work fine. If you live in a coastal area (less than 5 miles (8 km) from the ocean) you have to use stainless steel screws.
Do I need to screw every brick?
On the first row you will use one screw per brick at each furring strip. After that, you will stack four more rows, and then install one screw at each furring strip. Novabrik are attached on only every fourth row at the furring strips. This fastening pattern can carry 7 times the weight of the brick veneer. No need to increase the number of screws.
What are furring strips?
We recommend that you use 1 in x 3 in wood strips if they are available, 1 in x 4 in will work just as well. There is no need to use pressure treated wood for the furring strips.
What are the purpose of furring strips?
Furring strips do two things. They creates an air space between Novabrik and the house wall to let the siding breathe and they provide a positive connection for the brick while allowing you to correct uneven walls.
Where do I place the furring strips?
The furring strips are attached to the wall framing with our corrosion-resistant screws. Be sure to locate and attach the furring strips to the existing wall framing. These screws need to penetrate wood studs at least 1-1/4 inch.